Mending Mother Earth — GIZA Plateau Plugged into and Powers Earth’s Core
The Great Pyramid Of Giza. Has this in common with the speed of light. Ancient Egyptians knew even more about the Universe than academics believed with coordinates of Giza matching the speed of light. The exact GPS coordinates of The Great Pyramids of Egypt
299.9792458 N which by itself means very little however she enthusiasts have noticed that is the exactly the same number as the speed of light 299.9792458 meters per second. But it is not the only coincidence, suggesting that the ancient Egyptians were more in tune with the universe than historians believe. One of the most famous aspects of the great pyramid of Giza is perfectly aligned true North.
And if you take the mass of the Great Pyramid at six million tons and multiply it by a factor of one hundred million it gives you the overall mass of the Earth. However there are some who think this all coincidental. Too coincidental to be a coincidence.
In astrophysics, a bow shock occurs when the magnetosphere of an astrophysical object interacts with the nearby flowing ambient plasma such as the solar wind from solar flare activity.
Pyramid Mystery
I have always been fascinated by the Pyramids of Egypt. This is due in part to my over zealous upbringing inWest Texas. The topic of Egypt was strictly a subject involving Jesus Christened his travails with the powers of biblical times. I never heard a single word about what is known as one of The Seven Wonders of The World. The Pyramids were an overwhelming reality of the fact that the Pyramids
The pyramids were an overwhelming megalith one would think that they would have been an obvious curiosity or at least a subject of interest given their sizes and complexities are indeed a megalithic sites.
My first awareness of the Pyramids was the talk about them as burial sites for Egyptian royalty. Aided by Hollywood’s Science Fiction tales of mummies and attempts at eternal life. Why was there no mention of the Pyramids in the Bible? It was for me “The Rhinoceros’s Head” on the table, too obvious to ignore. The Pyramids are at least five thousand years old so they were certainly around in 1 BCE.
One of my first encounters with Egyptian antiquity was on a visit to Turin Italy and a museum exhibit of King Tut. Years earlier in 1980 I was in London and saw the massive obelisk on the banks of The Thames River.
A decade ago I became fascinated by megaliths when I started looking more closely at megalithic sites in Machu Picchu Peru.
While scanning the History Channel and National Geographic, the experience changed for me. I found the figures of symbolic earth figures: I saw faces everywhere. The Condor, The Dragon and The Puma can be found in the architectural features as well. There is also overwhelming evidence of the use of higher mathematics in Lima and Giza both.
All of this has led to even more questions about how indigenous Egyptian inhabitants were able to build such much less design such structures. The answer seemed to be that earlier humans were involved long before the first century BCE.
I have questioned, researched and explored and yet still remain in an enigma. It us the true nature of a mystery, not a fictional tale on television, it has no solution it is only an open question and this a quest except there is no powerful golden chalice to rescue and return, no sword in the stone, no Arc Of The Covenant, The quest is for a greater treasure, Truth.
I believe that “the original builders,” were our human relatives whose goal is to bring mankind onto the 21st Century and that a key to success is both humaneness and belongingness.
Stone is one of the first materials used by humans. Natural deposits of granite, marble, slate and other stones have served applications from practical to artistic, or in the case of Akhet Khufu, both since science has revealed evidence that the entire Giza Plateau was designed to be a magnetohydrodynamic installation capable of many things including desalinization a the production of potable drinking water as well as creating steam for energy/light production.
The stone cutting process consists of two broad steps: extracting stone from the earth and then treating and shaping it for its desired purpose. Over time, a number of different tools and methods have been used cut stone.
Early Stone Age
The most primitive method of stone cutting involved simply hitting a soft stone with a harder one. This process dates back to, appropriately enough, the Early Stone Age.
At the time, stone was used primarily as a weapon. Early “tool kits” included hammer-stones, which were used to do the work, and core stones, from which smaller flakes were struck to provide cutting edges.
Ancient Egyptians
Ancient Egyptian civilizations constructed pyramids, obelisks and some of the more stunning examples of stonework found in history. Khufu for instance is consisted 2.3 million blocks of approximately 2.5 tons each.
The Egyptians’ quarrying technique consisted of digging a trench around a block of stone, then cutting beneath the stone and pushing it out.
Once the stone was extracted, workers cut a series of holes with a hammer and chisel. Water-soaked wooden wedges were inserted into the holes, where they expanded and split the rock. Bronze tools were used with limestone and other softer rocks.
Next to the dolomite used on the exterior Great Giza Pyramid Piezo-Electric Crystal Power Primer, dolomite is known to increase but if a quartz crystal is squeezed along a certain direction the atoms shift because of the resulting asymmetry in charge the dipoles no longer cancel each other out. The opposite charges collect on opposite faces of the crystal. The stretched cell ends with a negative charge one side and. The net positive on the other. This charge imbalance is repeated all the way through the material, this results in a voltage that can drive electricity through a circuit.
Piezoelectric and Pyroelectric Ceramics And Pyroelectric ceramics. Ferroelectric, we have already considered some of the properties, some the crystal structures of the perovskite and let us continue talking about the different coefficient used in Piezoelectric phenomena. We have already discussed, the strain coefficient charge output coefficient as well as the Charge output coefficient and then the voltage and then the Voltage coefficients. We will define them corrects the stage how exactly and another very important parameter is the Coupling coefficient, which is basically the energy efficiency of system of that. Particular material either from the electrical to material of a mechanical and then n that is two energy terms.This is one of the more important aspects to be noted for piezoelectric effect of applying a stress and generating a Polarization or a voltage. If you apply an instantaneous and generating a Polarization or a voltage at a certain time.
Perspectives Enhancement Project_ P.O.V. _GATEWAY_YouTube
The theory developed by Bill Johnson and myself (Sam Cox) is that the Giza plateau and the pyramid Khufu in particular was designed and built to be a green energy producing installation using sea water and electrodynamic energy to create endless free energy and steam power. MHD = Magneto Hydrodynamic Device. Khufu and Cheops both are magnetos and they can both be used to drive voltage through a circuit.
Energy Harvesting using piezo electric devices to harvest electricity Piezoelectric crystals are small devices that convert mechanical stress into electric potential, which can ultimately be used to convert oscillating mechanical motion into a continuous power source. This project involves utilizing piezoelectric technology as an energy harvester for battery replacement in portable applications or as an alternative energy source. Piezoelectric crystals will be characterized with different mechanical excitations to quantify their theoretical maximum efficiencies. Power electronic circuits will be designed that interface to the piezoelectric devices to convert the energy into a more useful form for storage.
People are asking, are seismic upheavals and /or climate shift due to an ever weakening earth Geo-Magnetosphere shield causing problems? Science says, yes, then can energizing the geomagnetic core make a positive difference in shielding earth from CME assaults? Science says, “yes’”, then can energizing the geomagnetic core be done? Science says, Yes energized by Magnetic induction! Then, can humanity accomplish that? Science says, Yes humanity Can, from the Giza Plateau! What are the first steps? Sanity suggests, International co-operation embracing the world’s inclusion might help a great deal. The Giza Pyramid structures are part of a larger MHD Hydraulic Control System, with strong evidence designed with a “Pacemaker” like capability to electrically regulate a healthy Earth’s Geo-Magnetosphere. And all that points toward Giza Plateau Complex possess qualities capable of- Climate control an undoubted first class Computer Model Simulation by a team of the best in the world experts. The modeling gives us a roadmap with a plan, that success is achievable in the science and engineering aspects. A first International Cooperation step might be “The ScanPyramids Project Team,” getting the band back together.” If Research discovers how to implement the amelioration of the climate squeeze and/or also chill out the seismic uneasiness and in the process also we humans become global friends in doing so, then that is a lot of wins. May the relevant parties for this to make a positive difference be called forth at this moment now in action. An introduction to a multipurpose MHD control system as designed, built and operated a long time ago, now in disrepair and awaiting renewal.
Did a highly advanced civilization exist in prehistory? Is the Giza Pyramid a remnant of their technology? Then, what was the power source that fueled such a civilization? The technology of harmonic resonance, claims renowned master craftsman and engineer Christopher Dunn. In a brilliant piece of reverse engineering based on twenty years of research, Dunn reveals that the Great Pyramid of Giza was actually a large acoustical device! By its size and dimensions, this crystal edifice created a harmonic resonance with the Earth and converted Earth’s vibrational energies to microwave radiation. The author shows how the pyramid’s numerous chambers and passageways were positioned with the deliberate precision to maximize its acoustical qualities. This may be the same technology discovered by Nikola Tesla and the solution to our own clean energy needs.
